全国服务热线：
0757-81816789
热门搜索：温度开关、压缩机排气温控器、电流过载保护器、保险丝...
MTP1 Manual Reset Thermostat
- Product introduction
Product Features:
MTP1 is another high-end thermal protector that develops from the TP1 series of thermal protectors. It adds a heating element to the TP1 series, so that the thermal protector is kept disconnected by the heating characteristic of the PTC after disconnecting. The thermal protector will only cool down and reset after the device is completely powered off. Its power-off protection and delay protection function can safely protect the equipment and personal safety.
Application:
Mainly used for the overheating and over-current protection of vacuum cleaners, pulverizers, mixers, leather cutters and other power tools, etc.
Product advantages:
Manual power-off reset function to obtain utility model patent certificate
Diamond structure, small volume
With power-off protection, delay protection function
More reliable safety performance
More suitable for abnormal protection of the motor
Key Technical Parameters:
Rated voltage: 50/60HZ, 250V, AC
Nominal current: 2.5 (1.6) A,/10 (6.3) A, COSФ =1.0 (0.6)
Rated opening temperature range: +60 ℃ ~+160 ℃, take 5 ℃ as a grade
Type | TP1 | ||
Rated Voltage:50/60HZ | 220-250V | ||
Rated Current AC Max.load | COSΦ=1.0 | 2.5A | 10.0A |
COSΦ=0.6 | 1.6A | 6.3A | |
250V 50/60HZ | 6.3A | 16A | |
110V 50/60HZ | 10.0A | 36.0A | |
DC Max.load | 60V | 1.0A | 4.0A |
42V | 1.2A | 4.8A | |
6V 12V 24V | 1.5A | 6.0A | |
Contact arrangement | Normally Closed | ||
Rated Open temp.range | +60℃~+160℃,In steps of 5℃ | ||
Tolerance | ±5℃ | ||
Resetting temperature | Under normal temp. circumstance, reset after break down | ||
Contact resistance | ≤50mΩ | ||
Proof tracking index | PT1 175 | ||
For protection class | ClassⅠ | ||
Insulation class | IP00 | ||
Automatic action | Type 3 action | ||
Pressure stability of housing | 100N | ||
Vibration proof at 10-60Hz | 10 m/s² | ||
Dielectric Strength | AC 1500V 50/60HZ 1MIN | ||
Standard connection | 0.2 to 0.75mm2 （24AWG to 18AWG） | ||
Case material | Stainless steel | ||
Switching cycles at In | 300 cyles | ||
Length of shrinking cap | 22±2mm | ||